The filter is used to treat slurry by filtration, and is usually installed in the path of the slurry flow to intercept the solid particles in it. The filter element or filter screen of the filter needs to be cleaned or replaced regularly to ensure the treatment effect.

Generally speaking, basic home reverse osmosis systems cost between $200 and $600. These systems are usually suitable for small families and can meet daily drinking water needs. More powerful systems with higher processing capacity can cost up to $1,000 or even more.

The quality of groundwater is affected by the geographical environment, soil structure, rock composition and human activities. For example, groundwater in some areas may contain high concentrations of iron, manganese, sulfide or high hardness, resulting in yellow water, odor, scaling and other problems.

The capacity and processing capacity of container water treatment systems is another key factor. You need to choose a system of the right size based on your actual needs. Processing capacity is usually measured in terms of the amount of water treated per hour or day.

Well water and groundwater usually contain more silt, rust and organic matter, and the hardness is also high. In this case, it is recommended to install a mechanical filter or activated carbon filter first, and then install a water softener to ensure a comprehensive improvement in water quality.

A standard water treatment system usually consists of a pretreatment unit, a core treatment unit, a post-treatment unit, and auxiliary equipment. These parts work together to ensure that the water quality meets the expected standards.

The EDI water treatment system is a new water treatment process that combines electrodialysis (ED) and ion exchange technology, mainly used to produce high-purity deionized water. "2000L/H" means that the water output of the EDI system is 2000 liters per hour.

The higher the desalination rate, the better the purification effect of the system and the less dissolved solids in the pure water produced. Most high-quality reverse osmosis systems have a desalination rate of more than 90%, and some can even reach 99%.

The inlet and outlet valves of the water softener control the entry of hard water and the exit of soft water, respectively. If these valves are leaking, especially during the regeneration phase, water may continue to enter the salt tank, causing the water level to rise.

When talking about a 5-inch water filter housing, "5 inches" usually refers to the height of the housing, not its inner or outer diameter. This size of housing is generally suitable for a 5-inch long filter element.